Skoda Octavia MK3 (5E) et OBDEleven : liste des possibilités ( codages, lecture des codes défaut …)

Les modules OBD2 de la marque OBDEleven offrent de très nombreuses fonctionnalités pour nos véhicules du groupe VAG. Je vous propose de découvrir la liste de ce qu’il est possible de faire sur une Skoda Octavia – 2017-2020 : Lecture des codes défaut, Codage / activation d’options cachées, Scanner toutes les unités de contrôle, Contrôler les performances du véhicule, Modifier le comportement du véhicule en un seul clic …

Véhicule concerné dans cet article

Marque : Skoda
Model : Octavia MK3
Année : 2017-2020
Châssis : 5E

Quelles sont les possibilités d’activation sur Skoda Octavia – 2017-2020 avec OBDEleven ?

Nbre de codages / possibilités : 100

Nom du Codage	Descriptif
ESC OFF Permanently	Electronic stability control - a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding) ⚙️Functions Change the ESC button operation or turn it OFF completely. If a vehicle does not have a physical ESC button, settings can be changed via car multimedia by going to Car > Settings > ESC System ️⚠️ Attention This function is enabled for security reasons and helps to avoid accidents, therefore we do not recommend nor encourage this function to be deactivated
XDS Interaction	XDS - Electronic Differential Lock In moments of fast cornering XDS gives out exactly the right amount of power providing pressure on the inside wheel to prevent wheel spinning. The result is better traction and a reduction of any tendency to understeer ⚙️Functions Adjust XDS settings: Not Activated / Standard / Weak / Medium / Strong 📖 Requirements The vehicle must have a compatible ABS control unit
Pulsation of Start Button	Activate the pulsation of the Engine Start/Stop button light when the vehicle's engine is off. When the engine is started, the pulsation is stopped 📖 Requirements The vehicle must have a Keyless entry system ️⚠️ Attention If this application is not supported by the vehicle, use the "Pulsation of Start Button V2" app instead
Heated Seats Memory	Enable/Disable heated seat button state memory after ignition OFF, or enable memory for 10 minutes 📖 Requirements The vehicle must have a climate control system with heated seats
ESC OFF Permanently	Electronic stability control - a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding) ⚙️Functions Change the ESC button operation or turn it OFF completely. If a vehicle does not have a physical ESC button, settings can be changed via car multimedia by going to Car > Settings > ESC System ️⚠️ Attention This function is enabled for security reasons and helps to avoid accidents, therefore we do not recommend nor encourage this function to be deactivated
XDS Interaction	XDS - Electronic Differential Lock In moments of fast cornering XDS gives out exactly the right amount of power providing pressure on the inside wheel to prevent wheel spinning. The result is better traction and a reduction of any tendency to understeer ⚙️Functions Adjust XDS settings: Not Activated / Standard / Weak / Medium / Strong 📖 Requirements The vehicle must have a compatible ABS control unit
Pulsation of Start Button	Activate the pulsation of the Engine Start/Stop button light when the vehicle's engine is off. When the engine is started, the pulsation is stopped 📖 Requirements The vehicle must have a Keyless entry system ️⚠️ Attention If this application is not supported by the vehicle, use the "Pulsation of Start Button V2" app instead
Heated Seats Memory	Enable/Disable heated seat button state memory after ignition OFF, or enable memory for 10 minutes 📖 Requirements The vehicle must have a climate control system with heated seats
Front Pace-Car indicators "Urban Joke"	Pace-Car indicators - the front turn signals on the mirrors and in the headlights will blink one by one ⚙️ Functions Enable or disable Pace-Car indicators
Ambient Colors	This app will activate the ability to change ambient colors 📖 Requirements • The vehicle must have ambient colors function • The vehicle engine hood must be opened by activating the App ️⚠️ Attention • First turn the ignition ON and then open the vehicle's hood to activate the app • If the vehicle doesn't have color ambient lightning, colors will be changed only in the Virtual cockpit and multimedia! • 30 colors work only on multimedia with touch buttons
Low Ambient Temperature Warning	Adjust the temperature for low ambient temperature warning. The default is 4°C/39°F ️⚠️ Attention Warning notification still takes place, but at a different temperature level
10 Ambient Colors	This app will activate the ability to change ambient colors 📖 Requirements • The vehicle must have ambient colors function • The vehicle engine hood must be opened by activating the App ️⚠️ Attention • First turn the ignition ON and then open the vehicle's hood to activate the app • If the vehicle doesn't have color ambient lightning, colors will be changed only in the Virtual cockpit and multimedia! • 30 colors work only on multimedia with touch buttons
Turn Lights With Fog Lights vRS	To make more intensive turn signals, activate front fog lights to work together with turn lights ⚙️Functions Both V2 options work only when low beams are not active ️⚠️ Attention This app is only for vRS models. For non-vRS models use the "Turn Lights With Fog Lights" application
Multimedia Startup Logo	Change the image which is shown when the Multimedia system is starting up ️⚠️ Attention Application tested on MIB2.5, other multimedia units may not support this function
Cornering Lights VRS	The fog lights with the function “Corner” improve the illumination of areas close to the vehicle when turning, parking and are regulated according to the steering angle ⚙️ Functions Enable or disable static cornering lights via fog lights 📖 Requirements Vehicle must be equipped with fog lights ️⚠️ Attention 1. Works only with VRS models 2. This function is available only at night time or when the low beam is active
Pulsation of Start Button V2	V2 - Version 2 Activate the pulsation of the Engine Start/Stop button light when the vehicle's engine is off. When the engine is started, the pulsation is stopped 📖 Requirements The vehicle must have a Keyless entry system ️⚠️ Attention If this application is not supported by the vehicle, use the regular "Pulsation of Start Button" app instead
Fogs with Flash-To-Pass vRS	Flash-To-Pass - lets you briefly turn on additional lights (usually high beams) of your vehicle to notify other drivers on the road. They are activated when you pull the turn stalk towards you ⚙️ Functions Enable flashing front and/or rear fog lights along with flash-to-pass lights ️⚠️ Attention This app is only for vRS models. For non-vRS models use the "Fogs with Flash-To-Pass" application
Turn Lights With Fog Lights	To make more intensive turn signals, activate front fog lights to work together with turn lights ⚙️ Functions OFF - Turn signals working without fog lights ON V1 - Turn signal and fog light blinking each one after another ON V2 - Turn signal and fog light blinking simultaneously ️⚠️ Attention 1. This app is only for non-vRS models. For vRS models use the "Turn Lights With Fog Lights vRS" application 2. When fog lights, DRL via fog lights or static cornering lights via fog lights are ON they start to blink when the turn signal is active
Pace-Car Indicators "Urban Joke"	Choose how rear turn signals and position lights should act ⚙️ Functions ON V1 - Turn signal and position light blinking each one after another ON V2 - Turn signal and position light blinking simultaneously OFF - Turn signals working without position lights ️⚠️ Attention Make sure that the engine is not running when activating or deactivating this function
Turn Lights when Trunk Open	Turn signals in your vehicle's tail lights will light up when the trunk/tailgate is opened ⚙️ Functions Enable or disable turn signal activation when the trunk is opened
Taillights as Brake Lights	When pressing the brake pedal, the taillights (except fog, turn signals, and reverse) light up as the brake lights ⚙️ Functions ON - Taillights as brake lights OFF - Brake lights only 📖 Requirements LED taillights must be installed in the vehicle ️⚠️ Attention It will work only when Scandinavian DRL's are not activated
Fog Lights w/Open Door	Once the door is opened, the fog light starts lighting on that side ⚙️ Functions Rear doors - Fog light will light up when the rear door is opened Front doors - Fog light will light up when the front door is opened Front and rear doors - Fog light will light up when the front or rear door is opened OFF - Fog light will not light up
Turn Signals w/Open Door	Once the door is opened, the rear turn signal starts lighting on that side ⚙️ Functions Rear doors - Turn signal will light up when the rear door is opened Front doors - Turn signal will light up when the front door is opened Front and rear doors - Turn signal will light up when the front or rear door is opened OFF - Turn signal will not light up
Turn Signals Blinking Mode	Choose how the turn signals and brake lights should act ⚙️ Functions ON V1 - Turn signals and brake lights are blinking simultaneously ON V2 - Turn signals and brake lights are blinking one after another OFF - Only turn signals are blinking as usual
Automatic PDC Activation	PDC - Park Distance Control Automatically enables park distance control when an obstacle is detected 📖 Requirements Original Park Distance Control system must be installed
Comfort Windows	Open/Close the windows via remote key by holding Lock/Unlock buttons or holding the key rotated for some time in a lock of the door handle Lock - will close the windows Unlock - will open the windows ⚙️Functions Enable or disable comfort windows feature 📖 Requirements The electric windows must be calibrated ️☑️ In-Car procedure In the head unit follow the instruction: 1. Go to "Vehicle" 2. Then "Setup" 3. Click on "Open and Close" 4. Choose "Convenience opening (all windows or drivers window)"
Trailer Assist	The Trailer Assist helps to easier reverse precisely in a straight line, make turns when a trailer is attached. The direction of the trailer is regulated by the driver with the mirror adjustment knob ⚙️Functions Activate or deactivate the trailer assist 📖 Requirements 1. Trailer hitch must be installed in the vehicle 2. Area View must be installed in the vehicle 3. Parking Assist 3.0 must be installed in the vehicle ️☑️ In-Car procedure 1. Attach the trailer to the vehicle 2. Engage reverse 3. Press the Parking Assist button 4. Choose trailer direction with mirror adjustment knob
Auto Lock upon Exit	Once you leave the car with the key, the vehicle locks itself automatically, so you do not have to operate the key or the door sensors ⚙️Functions Activate or deactivate the automatic locking when leaving your car 📖 Requirements The vehicle must be equipped with a Start System Interface control unit (B7 Start System Interface) ️⚠️ Attention The vehicle is locked automatically if the driver's door is closed. The function will work even if the passenger doors are open
Increased Engine Responsiveness	Increase engine responsiveness by changing settings to the Audi program. It gives you a slightly more sporty driving feel ⚙️Functions Choose the driving type between standard and Audi mode ️⚠️ Attention The increase has been confirmed with a 1.5 TSI engine, other engines may call out fault in the 03-BRAKES control unit
Lane Assist	Lane Assist will help to steer your vehicle and keep you in the correct lane with gentle steering correction and – after a period without human input – a visual and audible warning ⚙️ Functions Enable or disable lane assist feature 📖 Requirements To activate this function vehicle must have multi-function camera installed ️☑️ In-Car procedure 1. After activating the app, turn the ignition OFF and back ON 2. Then go to Multimedia and select ''Vehicle Settings'' 3. Go to ''Driver Assistance Setup'' 4. Set Lane Assist to ''Active'' ️⚠️ Attention Make sure that the engine is not running when Activating/Deactivating this function
Consumption Display Correction	If the fuel consumption displayed in the MFD (multi function display) differs compared to real measured fuel consumption, it is possible to adjust the value, so that the correct fuel consumption is displayed ⚙️ Functions Adjust the indicated fuel consumption from 85% to 115% 📖 Requirements Vehicle must have an instrument cluster with multi function display
Driving Profile in Dashboard	When the preferred Drive Profile is selected, the notification of activated driving mode pops up in the dashboard ⚙️ Functions Allow showing the chosen driving profile in the digital cockpit dashboard 📖 Requirements To activate this app, the vehicle must have a Driving Mode Selection installed in the multimedia at first
CH/LH via Parking Lights	CH - Coming Home LH - Leaving Home The coming and leaving home lights can be activated as parking lights 📖 Requirements The light switch must be set to AUTO
Anti-Theft Alarm System	Activate alarm in cars without an original alarm system, no installation is required. If an unauthorized person tries to open your car doors, bonnet or boot/trunk the alarm will be triggered ⚙️ Functions Enable or disable anti-theft alarm system 📖 Requirements Applicable to vehicles without a standard alarm system ️⚠️ Attention This alarm only monitors doors, hood, and boot/trunk
Behavior when Key Inside Trunk	Choose how the vehicle should behave when the key is in the luggage compartment: opens the tailgate, appears the audible warning, or warns and opens the tailgate 📖 Requirements The vehicle must have a keyless system
Vehicle Model in Head Unit	Change the model of the vehicle which appears in the 'Vehicle Status' menu. Available models: RS, Scout or basic Limousine, Kombi vehicles 📖 Requirements The vehicle must be equipped with multimedia system
CD/DVD Ejection Lock	Lock CD/DVD Ejection button, to prevent unauthorized removal of the disc ⚙️ Functions Enable or disable CD/DVD eject button ️⚠️ Attention 1. Only works if there is a disc inserted in CD/DVD ROM. 2. Applicable with MIB2
Park Assist Audio Volume Lowering	The factory configuration is set that the volume in the radio/multimedia or navigation system is automatically reduced when reverse gear is engaged, for the driver to be able to hear park pilot beeps ⚙️Functions Enable or disable park assist audio volume lowering 📖 Requirements Park Assistant system must be installed in the vehicle
Park Assist Switch Off Speed	When you put your car into reverse gear, the park assist view shows up in the multimedia display. When you start driving, the park assist display disappears after the speed which is set ⚙️ Functions Adjust the speed at which the parking assist system automatically switches off (5-25km/h) 📖 Requirements The vehicle must have an original parking assist system installed
Hazard Switch Brightness	When the ignition is on, the hazard switch illuminates as well ⚙️Functions Change the hazard switch's brightness from 20% to 100% or turn it off
Headlight Flasher with IGN OFF	IGN - Ignition The high beam flashing can be used when the ignition is off. It helps to quickly illuminate the area by pulling the turn stalk towards you ⚙️Functions Allow flashing the high beam lights via a stalk, when the Ignition is turned OFF
License Plate Lights w/DRL	DRL - Daytime Running Lights License plate lights illuminate simultaneously with DRL lights
Front Fog Lights when Reversing	Enable front fog lights to turn on automatically when reverse gear is selected 📖 Requirements Vehicle must be equipped with fog lights
Video In Motion MIB3 ON	VIM - Video In Motion Video in Motion - Allows the PASSENGER to watch videos on Multimedia while the vehicle is moving This application does not activate video playback, it only removes restriction while moving ⚙️ Functions Activate video playback while driving 📖 Requirements Use this app only if you are able to watch videos while the vehicle is still and it locks when you start driving ☑️ In-Car Procedure 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia fully start (it takes around 3 minutes) before using this application 3. After VIM activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold the power on button for the 20s ⚠️ Attention • This function is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted by the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage • This function removes restrictions only when video is playing from external memory storage (USB or memory card). This app does not remove restrictions when watching videos from online platforms (Youtube, Netflix)
Emergency Braking Lights	During hard braking, the brake lights blink several times per second to warn the vehicles behind. Turn signals can work in conjunction with emergency brake lights - once the vehicle is stopped after emergency braking, hazard lights will start blinking. When the vehicle brakes normally, the lights work as usual ⚙️Functions Enable or disable emergency braking lights feature, choose if it will operate via brake lights, turn lights or both ️⚠️ Attention To test this function, drive at about 70 km/h and press the brake pedal firmly to a complete stop. Perform this test only in a safe location with no other vehicles or pedestrians nearby
Folding Mirrors with Ignition	Select mirrors to unfold by pressing unlock button on the remote key or by turning ON the ignition ⚙️ Functions Unlock Button - Mirrors will unfold after pressing unlock button on the remote key Ignition ON - Mirrors will unfold after turning the ignition ON 📖 Requirements Power folding mirrors must be installed in the vehicle and folding mirrors must be turned ON
Brake Check when using ACC	ACC - Adaptive Cruise Control If the brake is activated when using adaptive cruise control, the hazard switch will light up ⚙️ Functions ON - Hazard light switch indicates brake lights OFF - Hazard light switch indicates only hazard 📖 Requirements The vehicle must have adaptive cruise control equipped ️⚠️ Attention Hazard switch also will light up when the brake is pressed during normal driving
Parking Lights on Both Sides	By default, the parking lights only work on one side (using the turn indicator lever to activate). It is possible to adjust that regardless of which side you choose, both left and right parking lights are turned on ⚙️ Functions Adjust how will parking lights work - on one side, or on both sides 📖 Requirements Parking lights feature must be enabled
Signal Horn Always Operable	It is possible to adjust that the horn signal is always operable - even with Ignition OFF, or can only be operated with Ignition turned ON
Adaptive Lane Guidance	This function allows the vehicle to keep in the middle of the lane. Early setting means you will need to take the steering wheel earlier when deviating from the lane. Activating the late setting means the vehicle can deviate more until you need to take the steering wheel ⚙️Functions Choose the early, late setting via the app, or activate ON/OFF function in the multimedia by setting early or late setting via menu 📖 Requirements The vehicle must have a working lane assist feature ️☑️ In-Car procedure After activation, click the 'Menu' button on the multimedia, go to 'Assistants' -> 'Settings' -> 'Lane Assist'
ACC Speed Accelerator	ACC - Adaptive Cruise Control Enable the RES button to act as an accelerator while using ACC. Holding the RES button allows the vehicle to reach a previous set speed faster than usual ⚙️Functions Enable or disable the faster acceleration via the RES button while using ACC 📖 Requirements The vehicle must be equipped with ACC system
Front Pace-Car indicators "Urban Joke"	Pace-Car indicators - the front turn signals on the mirrors and in the headlights will blink one by one ⚙️ Functions Enable or disable Pace-Car indicators
Ambient Colors	This app will activate the ability to change ambient colors 📖 Requirements • The vehicle must have ambient colors function • The vehicle engine hood must be opened by activating the App ️⚠️ Attention • First turn the ignition ON and then open the vehicle's hood to activate the app • If the vehicle doesn't have color ambient lightning, colors will be changed only in the Virtual cockpit and multimedia! • 30 colors work only on multimedia with touch buttons
Low Ambient Temperature Warning	Adjust the temperature for low ambient temperature warning. The default is 4°C/39°F ️⚠️ Attention Warning notification still takes place, but at a different temperature level
10 Ambient Colors	This app will activate the ability to change ambient colors 📖 Requirements • The vehicle must have ambient colors function • The vehicle engine hood must be opened by activating the App ️⚠️ Attention • First turn the ignition ON and then open the vehicle's hood to activate the app • If the vehicle doesn't have color ambient lightning, colors will be changed only in the Virtual cockpit and multimedia! • 30 colors work only on multimedia with touch buttons
Turn Lights With Fog Lights vRS	To make more intensive turn signals, activate front fog lights to work together with turn lights ⚙️Functions Both V2 options work only when low beams are not active ️⚠️ Attention This app is only for vRS models. For non-vRS models use the "Turn Lights With Fog Lights" application
Multimedia Startup Logo	Change the image which is shown when the Multimedia system is starting up ️⚠️ Attention Application tested on MIB2.5, other multimedia units may not support this function
Cornering Lights VRS	The fog lights with the function “Corner” improve the illumination of areas close to the vehicle when turning, parking and are regulated according to the steering angle ⚙️ Functions Enable or disable static cornering lights via fog lights 📖 Requirements Vehicle must be equipped with fog lights ️⚠️ Attention 1. Works only with VRS models 2. This function is available only at night time or when the low beam is active
Pulsation of Start Button V2	V2 - Version 2 Activate the pulsation of the Engine Start/Stop button light when the vehicle's engine is off. When the engine is started, the pulsation is stopped 📖 Requirements The vehicle must have a Keyless entry system ️⚠️ Attention If this application is not supported by the vehicle, use the regular "Pulsation of Start Button" app instead
Fogs with Flash-To-Pass vRS	Flash-To-Pass - lets you briefly turn on additional lights (usually high beams) of your vehicle to notify other drivers on the road. They are activated when you pull the turn stalk towards you ⚙️ Functions Enable flashing front and/or rear fog lights along with flash-to-pass lights ️⚠️ Attention This app is only for vRS models. For non-vRS models use the "Fogs with Flash-To-Pass" application
Turn Lights With Fog Lights	To make more intensive turn signals, activate front fog lights to work together with turn lights ⚙️ Functions OFF - Turn signals working without fog lights ON V1 - Turn signal and fog light blinking each one after another ON V2 - Turn signal and fog light blinking simultaneously ️⚠️ Attention 1. This app is only for non-vRS models. For vRS models use the "Turn Lights With Fog Lights vRS" application 2. When fog lights, DRL via fog lights or static cornering lights via fog lights are ON they start to blink when the turn signal is active
Pace-Car Indicators "Urban Joke"	Choose how rear turn signals and position lights should act ⚙️ Functions ON V1 - Turn signal and position light blinking each one after another ON V2 - Turn signal and position light blinking simultaneously OFF - Turn signals working without position lights ️⚠️ Attention Make sure that the engine is not running when activating or deactivating this function
Turn Lights when Trunk Open	Turn signals in your vehicle's tail lights will light up when the trunk/tailgate is opened ⚙️ Functions Enable or disable turn signal activation when the trunk is opened
Taillights as Brake Lights	When pressing the brake pedal, the taillights (except fog, turn signals, and reverse) light up as the brake lights ⚙️ Functions ON - Taillights as brake lights OFF - Brake lights only 📖 Requirements LED taillights must be installed in the vehicle ️⚠️ Attention It will work only when Scandinavian DRL's are not activated
Fog Lights w/Open Door	Once the door is opened, the fog light starts lighting on that side ⚙️ Functions Rear doors - Fog light will light up when the rear door is opened Front doors - Fog light will light up when the front door is opened Front and rear doors - Fog light will light up when the front or rear door is opened OFF - Fog light will not light up
Turn Signals w/Open Door	Once the door is opened, the rear turn signal starts lighting on that side ⚙️ Functions Rear doors - Turn signal will light up when the rear door is opened Front doors - Turn signal will light up when the front door is opened Front and rear doors - Turn signal will light up when the front or rear door is opened OFF - Turn signal will not light up
Turn Signals Blinking Mode	Choose how the turn signals and brake lights should act ⚙️ Functions ON V1 - Turn signals and brake lights are blinking simultaneously ON V2 - Turn signals and brake lights are blinking one after another OFF - Only turn signals are blinking as usual
Automatic PDC Activation	PDC - Park Distance Control Automatically enables park distance control when an obstacle is detected 📖 Requirements Original Park Distance Control system must be installed
Comfort Windows	Open/Close the windows via remote key by holding Lock/Unlock buttons or holding the key rotated for some time in a lock of the door handle Lock - will close the windows Unlock - will open the windows ⚙️Functions Enable or disable comfort windows feature 📖 Requirements The electric windows must be calibrated ️☑️ In-Car procedure In the head unit follow the instruction: 1. Go to "Vehicle" 2. Then "Setup" 3. Click on "Open and Close" 4. Choose "Convenience opening (all windows or drivers window)"
Trailer Assist	The Trailer Assist helps to easier reverse precisely in a straight line, make turns when a trailer is attached. The direction of the trailer is regulated by the driver with the mirror adjustment knob ⚙️Functions Activate or deactivate the trailer assist 📖 Requirements 1. Trailer hitch must be installed in the vehicle 2. Area View must be installed in the vehicle 3. Parking Assist 3.0 must be installed in the vehicle ️☑️ In-Car procedure 1. Attach the trailer to the vehicle 2. Engage reverse 3. Press the Parking Assist button 4. Choose trailer direction with mirror adjustment knob
Auto Lock upon Exit	Once you leave the car with the key, the vehicle locks itself automatically, so you do not have to operate the key or the door sensors ⚙️Functions Activate or deactivate the automatic locking when leaving your car 📖 Requirements The vehicle must be equipped with a Start System Interface control unit (B7 Start System Interface) ️⚠️ Attention The vehicle is locked automatically if the driver's door is closed. The function will work even if the passenger doors are open
Increased Engine Responsiveness	Increase engine responsiveness by changing settings to the Audi program. It gives you a slightly more sporty driving feel ⚙️Functions Choose the driving type between standard and Audi mode ️⚠️ Attention The increase has been confirmed with a 1.5 TSI engine, other engines may call out fault in the 03-BRAKES control unit
Lane Assist	Lane Assist will help to steer your vehicle and keep you in the correct lane with gentle steering correction and – after a period without human input – a visual and audible warning ⚙️ Functions Enable or disable lane assist feature 📖 Requirements To activate this function vehicle must have multi-function camera installed ️☑️ In-Car procedure 1. After activating the app, turn the ignition OFF and back ON 2. Then go to Multimedia and select ''Vehicle Settings'' 3. Go to ''Driver Assistance Setup'' 4. Set Lane Assist to ''Active'' ️⚠️ Attention Make sure that the engine is not running when Activating/Deactivating this function
Consumption Display Correction	If the fuel consumption displayed in the MFD (multi function display) differs compared to real measured fuel consumption, it is possible to adjust the value, so that the correct fuel consumption is displayed ⚙️ Functions Adjust the indicated fuel consumption from 85% to 115% 📖 Requirements Vehicle must have an instrument cluster with multi function display
Driving Profile in Dashboard	When the preferred Drive Profile is selected, the notification of activated driving mode pops up in the dashboard ⚙️ Functions Allow showing the chosen driving profile in the digital cockpit dashboard 📖 Requirements To activate this app, the vehicle must have a Driving Mode Selection installed in the multimedia at first
CH/LH via Parking Lights	CH - Coming Home LH - Leaving Home The coming and leaving home lights can be activated as parking lights 📖 Requirements The light switch must be set to AUTO
Anti-Theft Alarm System	Activate alarm in cars without an original alarm system, no installation is required. If an unauthorized person tries to open your car doors, bonnet or boot/trunk the alarm will be triggered ⚙️ Functions Enable or disable anti-theft alarm system 📖 Requirements Applicable to vehicles without a standard alarm system ️⚠️ Attention This alarm only monitors doors, hood, and boot/trunk
Behavior when Key Inside Trunk	Choose how the vehicle should behave when the key is in the luggage compartment: opens the tailgate, appears the audible warning, or warns and opens the tailgate 📖 Requirements The vehicle must have a keyless system
Vehicle Model in Head Unit	Change the model of the vehicle which appears in the 'Vehicle Status' menu. Available models: RS, Scout or basic Limousine, Kombi vehicles 📖 Requirements The vehicle must be equipped with multimedia system
CD/DVD Ejection Lock	Lock CD/DVD Ejection button, to prevent unauthorized removal of the disc ⚙️ Functions Enable or disable CD/DVD eject button ️⚠️ Attention 1. Only works if there is a disc inserted in CD/DVD ROM. 2. Applicable with MIB2
Park Assist Audio Volume Lowering	The factory configuration is set that the volume in the radio/multimedia or navigation system is automatically reduced when reverse gear is engaged, for the driver to be able to hear park pilot beeps ⚙️Functions Enable or disable park assist audio volume lowering 📖 Requirements Park Assistant system must be installed in the vehicle
Park Assist Switch Off Speed	When you put your car into reverse gear, the park assist view shows up in the multimedia display. When you start driving, the park assist display disappears after the speed which is set ⚙️ Functions Adjust the speed at which the parking assist system automatically switches off (5-25km/h) 📖 Requirements The vehicle must have an original parking assist system installed
Hazard Switch Brightness	When the ignition is on, the hazard switch illuminates as well ⚙️Functions Change the hazard switch's brightness from 20% to 100% or turn it off
Headlight Flasher with IGN OFF	IGN - Ignition The high beam flashing can be used when the ignition is off. It helps to quickly illuminate the area by pulling the turn stalk towards you ⚙️Functions Allow flashing the high beam lights via a stalk, when the Ignition is turned OFF
License Plate Lights w/DRL	DRL - Daytime Running Lights License plate lights illuminate simultaneously with DRL lights
Front Fog Lights when Reversing	Enable front fog lights to turn on automatically when reverse gear is selected 📖 Requirements Vehicle must be equipped with fog lights
Video In Motion MIB3 ON	VIM - Video In Motion Video in Motion - Allows the PASSENGER to watch videos on Multimedia while the vehicle is moving This application does not activate video playback, it only removes restriction while moving ⚙️ Functions Activate video playback while driving 📖 Requirements Use this app only if you are able to watch videos while the vehicle is still and it locks when you start driving ☑️ In-Car Procedure 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia fully start (it takes around 3 minutes) before using this application 3. After VIM activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold the power on button for the 20s ⚠️ Attention • This function is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted by the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage • This function removes restrictions only when video is playing from external memory storage (USB or memory card). This app does not remove restrictions when watching videos from online platforms (Youtube, Netflix)
Emergency Braking Lights	During hard braking, the brake lights blink several times per second to warn the vehicles behind. Turn signals can work in conjunction with emergency brake lights - once the vehicle is stopped after emergency braking, hazard lights will start blinking. When the vehicle brakes normally, the lights work as usual ⚙️Functions Enable or disable emergency braking lights feature, choose if it will operate via brake lights, turn lights or both ️⚠️ Attention To test this function, drive at about 70 km/h and press the brake pedal firmly to a complete stop. Perform this test only in a safe location with no other vehicles or pedestrians nearby
Folding Mirrors with Ignition	Select mirrors to unfold by pressing unlock button on the remote key or by turning ON the ignition ⚙️ Functions Unlock Button - Mirrors will unfold after pressing unlock button on the remote key Ignition ON - Mirrors will unfold after turning the ignition ON 📖 Requirements Power folding mirrors must be installed in the vehicle and folding mirrors must be turned ON
Brake Check when using ACC	ACC - Adaptive Cruise Control If the brake is activated when using adaptive cruise control, the hazard switch will light up ⚙️ Functions ON - Hazard light switch indicates brake lights OFF - Hazard light switch indicates only hazard 📖 Requirements The vehicle must have adaptive cruise control equipped ️⚠️ Attention Hazard switch also will light up when the brake is pressed during normal driving
Parking Lights on Both Sides	By default, the parking lights only work on one side (using the turn indicator lever to activate). It is possible to adjust that regardless of which side you choose, both left and right parking lights are turned on ⚙️ Functions Adjust how will parking lights work - on one side, or on both sides 📖 Requirements Parking lights feature must be enabled
Signal Horn Always Operable	It is possible to adjust that the horn signal is always operable - even with Ignition OFF, or can only be operated with Ignition turned ON
Adaptive Lane Guidance	This function allows the vehicle to keep in the middle of the lane. Early setting means you will need to take the steering wheel earlier when deviating from the lane. Activating the late setting means the vehicle can deviate more until you need to take the steering wheel ⚙️Functions Choose the early, late setting via the app, or activate ON/OFF function in the multimedia by setting early or late setting via menu 📖 Requirements The vehicle must have a working lane assist feature ️☑️ In-Car procedure After activation, click the 'Menu' button on the multimedia, go to 'Assistants' -> 'Settings' -> 'Lane Assist'
ACC Speed Accelerator	ACC - Adaptive Cruise Control Enable the RES button to act as an accelerator while using ACC. Holding the RES button allows the vehicle to reach a previous set speed faster than usual ⚙️Functions Enable or disable the faster acceleration via the RES button while using ACC 📖 Requirements The vehicle must be equipped with ACC system
Multimedia Safety Disclaimer	When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units.
Multimedia Safety Disclaimer	When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units.
Headlight Notification	Deactivate the headlight notification so that it doesn't appear on the dashboard when starting the engine with the light switch set to OFF (0) position.
Headlight Notification	Deactivate the headlight notification so that it doesn't appear on the dashboard when starting the engine with the light switch set to OFF (0) position.
Rear Fog Lights	Rear Fog Lights ⚙️ Functions
Rear Fog Lights	Rear Fog Lights ⚙️ Functions