OBDEleven et Audi TT 2017-2019 : à quoi ça sert ? quelles sont les possibilités ? Entretien, Codes Défaut, Lecteur OBDII, Activation d’options cachées …
Les modules OBD2 de la marque OBDEleven offrent de nombreuses possibilités et peuvent se révéler très pratique lorsqu’on a un véhicule du groupe AUDI / VOLKSWAGEN. En effet, connecté à une application mobile compatible iOS et Android, les modules OBD Eleven offrent tout un tas de fonctions très utiles et parfois même des fonctions auxquelles on aurait jamais pensé :
- Lecture des codes défaut et effacement du code défaut
- Activation d’option cachées
- Fonctions avancées et accès sécurisés aux calculateurs
- Personnalisation de conduite
- … et bien d’autre encore !
Je vous propose une liste très très complète de tout ce qu’il est possible de faire :
Véhicule concerné dans cet article
- Marque : Audi
- Model : TT
- Année : 2017-2019
Quelles sont les possibilités d’activation, de codages … sur Audi TT avec OBDEleven ?
Nbre de codages / possibilités : 100
| Nom du Codage | Descriptif |
|---|---|
| The hill start assist | The hill start assist is holding the vehicle when the foot brake is released by temporarily locking the brake pressure (for a maximum of 1.5 seconds) to provide comfortable starting without rolling back. Hill start assist will operate greater on inclines than 5% and is fitted in combination with both: the manual transmission and the direct shift gearbox (DSG). ⚙️ FUNCTION Adjust Hill Start Assist sensitivity |
| Headlight washer | ⚙️ FUNCTION Turn ON or OFF Headlights Washer System. 📖 REQUIREMENTS Vehicle must have Headlights Washing System installed. ⚠️ ATTENTION Deactivating the Headlights Washing System with Xenon headlights is prohibited and is against the law in some countries. |
| Soundaktor | Soundaktor (German for "sound actuator") is a vehicle audio system used to simulate engine noise in the cabin of some automobiles. It consists of a speaker mounted on the firewall between the engine and the cabin, which adds noise to the cabin in order to increase the driving experience ⚙️Functions Adjust Soundaktor simulated engine noise level or turn it OFF completely 📖 Requirements Vehicle must have a Soundaktor installed |
| LED license plate lamps | Use this function to remove trouble codes which appeared after LED license plate lamps installation. ⚙️ FUNCTION Adapt to Bulb or LED license plate lamps ⚠️ ATTENTION This application requires additional parts to be retrofitted/installed into your vehicle. Use this application only if you already installed all parts which are mentioned in application description. |
| Auto lock | This application will make the vehicle to lock automatically when the key is outside and the vehicle all doors are closed. ⚙️ FUNCTION Turn OFF or ON the auto lock. 📖 REQUIREMENTS The vehicle must have a keyless entry system (Control Unit: B7 Start System Interface). ⚠️ ATTENTION The applications only work in the vehicles which have the software and hardware part numbers starting with "5Q0", as an example "5Q0959435". Software and hardware numbers could be found: Control Unit: B7 Start System Interface > Info > Software and Hardware numbers. |
| Lap Timer | This function activates Lap timer in your vehicle instrument cluster/dashboard. ⚙️ FUNCTION Turn ON or OFF Lap Timer function 📖 REQUIREMENTS Vehicle must have dashboard with color display ⚠️ ATTENTION This app doesn't work if engine is running. Use this function ONLY with ignition on. |
| DRL function with Turn signal | DRL Function with Turn Signal - When the headlights are on and the turn signal is turned on, the headlights go off on the turn side. They turn back on when the turn signal is turned off. DRL - Daytime Running Lights ⚙️ FUNCTION ON - DRL stay on with turn signal on OFF - DRL turns off with turn signal on DIMM - DRL dimm with turn signal on |
| Headlight NAR restriction | Removes restriction on headlights of 4 lights turned on at the same time (i.e. cornering lights with fogs on), and headlights will raise ever so slightly at faster speeds. NAR - North America Region ⚙️ FUNCTION Turn ON or OFF Headlight NAR restrictions ⚠️ ATTENTION Do not use this app if your car is equipped with Matrix headlights! |
| Comfort turn signal | Comfort turn Signals - Increase number of indicator flashes when you turn on turn signal. ⚙️ FUNCTION Adjust comfort turn signals cycle from 2-5. ☑️ IN-CAR PROCEDURE 1. Press the Car button on the multimedia. 2. Press Set-up 3.In the Vehicle Setting screen, press the Factory Settings panel (it's at the very end of the list at the bottom of the screen) 4. In the Factory Settings screen, under Reset individual settings/data, press Vehicle, or Lights 5. Press Reset tab in the window that says Reset "Vehicle/Lights" settings-are you sure? 6. Press YES. Now your turn signal cycle should change. |
| Seat belt warning | ⚙️ FUNCTION OFF - Disable Seat-Belt Warning EU - Continues Seat-Belt Warning USA - Seat-Belt Warning repeats 6 times and stops 📖 REQUIREMENTS This application does not work if engine is running. Only use this function with ignition ON. ⚠️ ATTENTION Driving without Seat-Belt violates the law in many countries! We do not encourage or recommend Seat - Belt Warning deactivation, because in case of an accident, protection systems (Airbags, Seat-Belt pretensioners, etc.) will only protect the driver or passengers if Seat-Belts are buckled. |
| Open Door Alarm | Open door alarm gives an audible warning tone when the ignition is ON and the doors are open. ⚙️ Functions Disable or activate open door warning tone for only driver door or all doors. ⚙️ Functions ️⚠️ Attention Open Door Alarm app with warning OFF will work only when the ignition is ON. For safety reasons, the Open Door Alarm will not be disabled when the engine is running. |
| Second phone support | Allows connecting two phones to the car's multimedia system. ⚙️ FUNCTION Turn OFF or ON availability to connect two phones in the system. 📖 REQUIREMENTS Vehicle must have the multimedia. |
| Video in motion for MIB | Video in Motion - Allows the PASSENGER to watch videos on multimedia while vehicle is moving. VIM - Video in motion MIB - Audi Modular Infotainment System This application does not activate video playback, it only removes restriction while moving. ⚙️ FUNCTIONS ON - VIM active and video playback is available while driving. OFF- VIM not active video playback not available while driving. 📖 REQUIREMENTS Use this app only if you are able to watch videos while vehicle is still and it locks when you start driving! This application will not working on 2018 models which have MIB unit with software version above 1000 (The version can be checked by going to Multimedia (5F) > Info > Software number). ☑️ IN-CAR PROCEDURE 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia to fully start (it takes around 3 minutes) before using this application. 3. After VIM activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold power on button for 20s. ⚠️ ATTENTION This functions is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted with the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage. |
| MirrorLink in motion | MirrorLink in Motion - Allows the PASSENGER to watch videos on multimedia while vehicle is moving by removing the restriction of MirrorLink function while the vehicle is moving. ⚙️ FUNCTIONS ON - MirrorLink is available while driving. OFF - MirrorLink not available while driving. 📖 REQUIREMENTS Use this app only if you are able to use the MirrorLink in still standing and it locks when you start driving! ☑️ IN-CAR PROCEDURE 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia to fully start (it takes around 3 minutes) before using this application. 3. After MirrorLink activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold power on button for 20s. ⚠️ ATTENTION This functions is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted with the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage. |
| High beam memory | High Beam Assist - dips your high beam automatically to improve driver control and safety for both the driver and other road users. The system is automatically activated when travelling over 37mph with your dipped beams on. This application allows to activate memory of the position of high beam assistant after ignition OFF/ON. ⚙️ FUNCTION Turn OFF or ON the remembering of high beam assist position. 📖 REQUIREMENTS High beam assistant must be installed in vehicle. |
| Taillight and License Light OFF | During daytime the tail lights and license plate lights are disabled. ⚙️ Functions ON - Lights disabled OFF - Lights enabled (standard) ️⚠️ Attention JAPAN ONLY |
| Scandinavian DRLs | DRL - Daytime Running Lights Scandinavian DRLs - Both DRL and tail lights are ON simultaneously. This function is mandatory in Scandinavian countries, except cars from 2009 which can be equipped with daytime running lights without the need for tail lights to be on. |
| Exhaust Flap Deactivation | The exhaust flap valve is used to quieten exhaust sound at lower RPMs/normal driving by limiting exhaust flow. You can deactivate the valve to leave it permanently open or closed. For improved engine response, increased torque and a more sporty sound, deactivate the flaps while in dynamic mode. ⚙️ Functions ON - exhaust flaps active OFF - exhaust flaps inactive 📖 Requirements Exhaust system with flaps ️☑️ In-Car procedure - Park the car in dynamic mode (to open up the flaps) before activating the app ️⚠️ Attention This modification may be against the LAW in some countries due to noise regulations |
| Upper Speed Threshold For Cornering Lights | By default, the cornering lights work at a speed up to 40 km/h. You have the ability to adjust the maximum speed at which cornering lights will still operate ⚙️ Functions The upper threshold of cornering lights activation can be set to 40km/h or 60km/h 📖 Requirements Headlights with static cornering lights feature must be installed and enabled |
| Lock/Unlock Acoustic Confirmation | Acoustic confirmation when locking and unlocking via remote will notify that the vehicle was successfully locked or unlocked, so you know your vehicle is secure when walking away ⚙️ Functions Enable or disable acoustic confirmation, when locking, unlocking or locking AND unlocking 📖 Requirements The vehicle must have OEM security system installed |
| Activate Start-up Assist (Auto Hold) | Activate the Start-Up Assist after retrofitting the Auto Hold switch. The car will hold the brake permanently when the vehicle is stationary until you start moving again |
| Mirror Dip | Mirror Dip feature automatically lowers the passenger side mirror when reverse gear is selected. This provides visibility of the lower side of the car and helps to see the edge of the sidewalk, which simplifies parking 📖 Requirements The vehicle must have mirrors with memory function ️☑️ In-Car procedure 1) Set mirror switch to the R position 2) Enable mirror dip function via car display 3) Engage R gear ⚠️If the mirror dip still doesn't work, follow these instructions: 1) Switch ignition ON 2) Enable mirror dip via car display 3) Set mirror switch to R 4) Engage R gear 5) Manually move the mirror to the position that must be stored 6) Engage P gear 7) Switch ignition OFF Now test mirror dip functionality ️⚠️ Attention When driving away and the speed exceeds 15 km/h, the mirror automatically readjusts to normal position |
| Third Brake as Position Lights | DRL - Daytime Running Lights Additional brake light illuminates simultaneously with position lights ⚙️ Functions Enable or disable the third brake light to illuminate in conjunction with parking or parking/Scandinavian DRL's lights |
| High Beam Assist | High Beam Assist system automatically dips the headlights when it detects either oncoming traffic or vehicles ahead. The system is automatically activated when traveling over 60km/h (37mph) with your dipped beams on HBA - High Beam Assist. V1, V2, V3 - This is the vehicle headlight version. According to OFF Version, make the same Version to ON ⚙️ Functions Enable or disable high beam assist feature 📖 Requirements The vehicle must have Lane Assist. A front assist camera must be installed in the vehicle. ️☑️ In-Car procedure 1. Before using the application, the lights must be set on OFF mode in the vehicle. 2. After activation, go to light settings in your MMI, find 'Light Assist' and turn this option ON. 3. Now with the headlight switch set to auto, push the left stalk forward. The HBA logo indicator at the bottom of the Dashboard display should now be active. |
| HBA Activation Speed | HBA - High Beam Assist High Beam Assist system automatically dips the headlights when it detects either oncoming traffic or vehicles ahead. The system is automatically activated when traveling over 60km/h (37mph) with your dipped beams on ⚙️ Functions Adjust the speed threshold at which the Automatic High Beam lights turn on. Choose from 0 to 80 km/h 📖 Requirements High beam assistant must be installed and enabled in vehicle |
| Auto Lock upon Exit | Once you leave the car with the key, the vehicle locks itself automatically, so you do not have to operate the key or the door sensors ⚙️ Functions Activate or deactivate the automatic locking when leaving your car 📖 Requirements The vehicle must be equipped with a Start System Interface control unit (B7 Start System Interface) ️⚠️ Attention The vehicle is locked automatically if the driver's doors are closed. The function will work even if the passenger doors are open |
| Auto Folding Mirrors | Side-view mirrors can be set to automatically fold when you lock the vehicle, to protect them when the car is parked or being washed in an automated car wash ⚙️ Functions Enable or disable folding mirrors feature to Auto or Manual 📖 Requirements The vehicle must have power-folding mirrors ️⚠️ Attention After app activation, the function must be enabled in the vehicles' multimedia menu 'Mirrors and Wipers' |
| Start/Stop System Deactivation | Start/Stop system - automatically shuts down and restarts the engine to reduce the amount of time the engine spends idling, thereby reducing fuel consumption and emissions ⚙️ Functions Disable or enable the Start/Stop system permanently |
| DRL Settings | DRL - Daytime Running Lights Unlock additional daytime running light options in your car's light settings ⚙️ Functions Enable or disable the additional DRL option |
| Wipers Service Mode | Wipers in service mode mean that the blades are in the upright position. It makes it easier to change the rubbers of the wipers ⚙️ Functions Activate or deactivate the wipers service mode ️☑️ In-Car procedure 1. Turn the Ignition ON 2. Turn the Ignition OFF 3. Press the wiper stalk down |
| A/C Intensity Adjustment for Summer | A/C - Air Conditioning Set your air conditioning to colder or warmer operation. It will increase the cooling or heating of your vehicle's interior ⚙️ Functions Enable or disable A/C intensity by choosing colder or warmer operation 📖 Requirements An air conditioning system must be installed and active |
| A/C Intensity Adjustment for Winter | A/C - Air Conditioning Set your air conditioning to colder or warmer operation. It will increase the cooling or heating of your vehicle's interior ⚙️ Functions Enable or disable A/C intensity by choosing colder or warmer operation 📖 Requirements An air conditioning system must be installed and active |
| Brake Check when Using ACC | ACC - Adaptive Cruise Control If the brake is activated when using adaptive cruise control, the hazard switch will light up ⚙️ Functions ON - Hazard light switch indicates brake lights OFF - Hazard light switch indicates only hazard 📖 Requirements The vehicle must have an adaptive cruise control equipped ️⚠️ Attention Hazard switch will also light up when the brake is pressed during normal driving |
| Rear Spoiler Manual Extension | By default, the electrically extendable spoiler protracts and retracts automatically depending on the speed. Using this function, you can remain the rear spoiler in your desired position at any speed by controlling it with the built-in interior button 📖 Requirements An automatic Rear Spoiler must be installed in the vehicle ️☑️ In-Car procedure Extend/retract the spoiler by pressing the button in the vehicle's interior |
| Steering Response | ⚙️ Functions Change the steering response by switching the driving profile Driving Profile Selection Button - steering response changes via mode button (Standard) Comfort - soft and easy steering Automatic - at low RPM's the steering is soft and easy and at higher RPM's steering is heavier Dynamic - steering is heavier and stiffer for a more sporty feeling |
| Interior Lights Fade-In/Out | Interior lights will fade in and fade out when switched on and off. Normally they light up immediately instead of fading ⚙️ Functions Enable or disable interior lights fading |
| DRL Brigthness | DRL - Daytime Running Lights Adjust the brightness of daytime running lights. 📖 Requirements DRL has to be activated in the vehicle |
| Display SIM APN Setting Screen | APN - Access Point Name The APN defines the network path for all cellular data connectivity By default, when the SIM card is inserted, it is not recognized and the APN settings screen is not displayed. After changing the settings to Automatic, the SIM card will be recognized automatically and the APN settings window will be displayed ⚙️Functions Activate the APN setting display screen of the SIM card 📖 Requirements Please insert a SIM card before setting APN ️☑️ In-Car procedure To access APN settings, go to: Settings -> Connection manager -> Data connection -> Online setting -> Data connection setting -> APN setting |
| The hill start assist | The hill start assist is holding the vehicle when the foot brake is released by temporarily locking the brake pressure (for a maximum of 1.5 seconds) to provide comfortable starting without rolling back. Hill start assist will operate greater on inclines than 5% and is fitted in combination with both: the manual transmission and the direct shift gearbox (DSG). ⚙️ FUNCTION Adjust Hill Start Assist sensitivity |
| Headlight washer | ⚙️ FUNCTION Turn ON or OFF Headlights Washer System. 📖 REQUIREMENTS Vehicle must have Headlights Washing System installed. ⚠️ ATTENTION Deactivating the Headlights Washing System with Xenon headlights is prohibited and is against the law in some countries. |
| Soundaktor | Soundaktor (German for "sound actuator") is a vehicle audio system used to simulate engine noise in the cabin of some automobiles. It consists of a speaker mounted on the firewall between the engine and the cabin, which adds noise to the cabin in order to increase the driving experience ⚙️Functions Adjust Soundaktor simulated engine noise level or turn it OFF completely 📖 Requirements Vehicle must have a Soundaktor installed |
| LED license plate lamps | Use this function to remove trouble codes which appeared after LED license plate lamps installation. ⚙️ FUNCTION Adapt to Bulb or LED license plate lamps ⚠️ ATTENTION This application requires additional parts to be retrofitted/installed into your vehicle. Use this application only if you already installed all parts which are mentioned in application description. |
| Auto lock | This application will make the vehicle to lock automatically when the key is outside and the vehicle all doors are closed. ⚙️ FUNCTION Turn OFF or ON the auto lock. 📖 REQUIREMENTS The vehicle must have a keyless entry system (Control Unit: B7 Start System Interface). ⚠️ ATTENTION The applications only work in the vehicles which have the software and hardware part numbers starting with "5Q0", as an example "5Q0959435". Software and hardware numbers could be found: Control Unit: B7 Start System Interface > Info > Software and Hardware numbers. |
| Lap Timer | This function activates Lap timer in your vehicle instrument cluster/dashboard. ⚙️ FUNCTION Turn ON or OFF Lap Timer function 📖 REQUIREMENTS Vehicle must have dashboard with color display ⚠️ ATTENTION This app doesn't work if engine is running. Use this function ONLY with ignition on. |
| DRL function with Turn signal | DRL Function with Turn Signal - When the headlights are on and the turn signal is turned on, the headlights go off on the turn side. They turn back on when the turn signal is turned off. DRL - Daytime Running Lights ⚙️ FUNCTION ON - DRL stay on with turn signal on OFF - DRL turns off with turn signal on DIMM - DRL dimm with turn signal on |
| Headlight NAR restriction | Removes restriction on headlights of 4 lights turned on at the same time (i.e. cornering lights with fogs on), and headlights will raise ever so slightly at faster speeds. NAR - North America Region ⚙️ FUNCTION Turn ON or OFF Headlight NAR restrictions ⚠️ ATTENTION Do not use this app if your car is equipped with Matrix headlights! |
| Comfort turn signal | Comfort turn Signals - Increase number of indicator flashes when you turn on turn signal. ⚙️ FUNCTION Adjust comfort turn signals cycle from 2-5. ☑️ IN-CAR PROCEDURE 1. Press the Car button on the multimedia. 2. Press Set-up 3.In the Vehicle Setting screen, press the Factory Settings panel (it's at the very end of the list at the bottom of the screen) 4. In the Factory Settings screen, under Reset individual settings/data, press Vehicle, or Lights 5. Press Reset tab in the window that says Reset "Vehicle/Lights" settings-are you sure? 6. Press YES. Now your turn signal cycle should change. |
| Seat belt warning | ⚙️ FUNCTION OFF - Disable Seat-Belt Warning EU - Continues Seat-Belt Warning USA - Seat-Belt Warning repeats 6 times and stops 📖 REQUIREMENTS This application does not work if engine is running. Only use this function with ignition ON. ⚠️ ATTENTION Driving without Seat-Belt violates the law in many countries! We do not encourage or recommend Seat - Belt Warning deactivation, because in case of an accident, protection systems (Airbags, Seat-Belt pretensioners, etc.) will only protect the driver or passengers if Seat-Belts are buckled. |
| Open Door Alarm | Open door alarm gives an audible warning tone when the ignition is ON and the doors are open. ⚙️ Functions Disable or activate open door warning tone for only driver door or all doors. ⚙️ Functions ️⚠️ Attention Open Door Alarm app with warning OFF will work only when the ignition is ON. For safety reasons, the Open Door Alarm will not be disabled when the engine is running. |
| Second phone support | Allows connecting two phones to the car's multimedia system. ⚙️ FUNCTION Turn OFF or ON availability to connect two phones in the system. 📖 REQUIREMENTS Vehicle must have the multimedia. |
| Video in motion for MIB | Video in Motion - Allows the PASSENGER to watch videos on multimedia while vehicle is moving. VIM - Video in motion MIB - Audi Modular Infotainment System This application does not activate video playback, it only removes restriction while moving. ⚙️ FUNCTIONS ON - VIM active and video playback is available while driving. OFF- VIM not active video playback not available while driving. 📖 REQUIREMENTS Use this app only if you are able to watch videos while vehicle is still and it locks when you start driving! This application will not working on 2018 models which have MIB unit with software version above 1000 (The version can be checked by going to Multimedia (5F) > Info > Software number). ☑️ IN-CAR PROCEDURE 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia to fully start (it takes around 3 minutes) before using this application. 3. After VIM activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold power on button for 20s. ⚠️ ATTENTION This functions is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted with the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage. |
| MirrorLink in motion | MirrorLink in Motion - Allows the PASSENGER to watch videos on multimedia while vehicle is moving by removing the restriction of MirrorLink function while the vehicle is moving. ⚙️ FUNCTIONS ON - MirrorLink is available while driving. OFF - MirrorLink not available while driving. 📖 REQUIREMENTS Use this app only if you are able to use the MirrorLink in still standing and it locks when you start driving! ☑️ IN-CAR PROCEDURE 1. Turn the ignition ON. Do not start the engine! 2. Let Multimedia to fully start (it takes around 3 minutes) before using this application. 3. After MirrorLink activation, multimedia must be restarted if not restarted automatically. To restart multimedia press and hold power on button for 20s. ⚠️ ATTENTION This functions is disabled for security reasons and helps avoid accidents. It can be very dangerous if the driver is distracted with the video, wherefore we do not recommend nor encourage this function to be activated. Laws in some countries do not allow this function to be enabled. Do this at your own risk! We are not responsible for any loss or damage. |
| High beam memory | High Beam Assist - dips your high beam automatically to improve driver control and safety for both the driver and other road users. The system is automatically activated when travelling over 37mph with your dipped beams on. This application allows to activate memory of the position of high beam assistant after ignition OFF/ON. ⚙️ FUNCTION Turn OFF or ON the remembering of high beam assist position. 📖 REQUIREMENTS High beam assistant must be installed in vehicle. |
| Taillight and License Light OFF | During daytime the tail lights and license plate lights are disabled. ⚙️ Functions ON - Lights disabled OFF - Lights enabled (standard) ️⚠️ Attention JAPAN ONLY |
| Scandinavian DRLs | DRL - Daytime Running Lights Scandinavian DRLs - Both DRL and tail lights are ON simultaneously. This function is mandatory in Scandinavian countries, except cars from 2009 which can be equipped with daytime running lights without the need for tail lights to be on. |
| Exhaust Flap Deactivation | The exhaust flap valve is used to quieten exhaust sound at lower RPMs/normal driving by limiting exhaust flow. You can deactivate the valve to leave it permanently open or closed. For improved engine response, increased torque and a more sporty sound, deactivate the flaps while in dynamic mode. ⚙️ Functions ON - exhaust flaps active OFF - exhaust flaps inactive 📖 Requirements Exhaust system with flaps ️☑️ In-Car procedure - Park the car in dynamic mode (to open up the flaps) before activating the app ️⚠️ Attention This modification may be against the LAW in some countries due to noise regulations |
| Upper Speed Threshold For Cornering Lights | By default, the cornering lights work at a speed up to 40 km/h. You have the ability to adjust the maximum speed at which cornering lights will still operate ⚙️ Functions The upper threshold of cornering lights activation can be set to 40km/h or 60km/h 📖 Requirements Headlights with static cornering lights feature must be installed and enabled |
| Lock/Unlock Acoustic Confirmation | Acoustic confirmation when locking and unlocking via remote will notify that the vehicle was successfully locked or unlocked, so you know your vehicle is secure when walking away ⚙️ Functions Enable or disable acoustic confirmation, when locking, unlocking or locking AND unlocking 📖 Requirements The vehicle must have OEM security system installed |
| Activate Start-up Assist (Auto Hold) | Activate the Start-Up Assist after retrofitting the Auto Hold switch. The car will hold the brake permanently when the vehicle is stationary until you start moving again |
| Mirror Dip | Mirror Dip feature automatically lowers the passenger side mirror when reverse gear is selected. This provides visibility of the lower side of the car and helps to see the edge of the sidewalk, which simplifies parking 📖 Requirements The vehicle must have mirrors with memory function ️☑️ In-Car procedure 1) Set mirror switch to the R position 2) Enable mirror dip function via car display 3) Engage R gear ⚠️If the mirror dip still doesn't work, follow these instructions: 1) Switch ignition ON 2) Enable mirror dip via car display 3) Set mirror switch to R 4) Engage R gear 5) Manually move the mirror to the position that must be stored 6) Engage P gear 7) Switch ignition OFF Now test mirror dip functionality ️⚠️ Attention When driving away and the speed exceeds 15 km/h, the mirror automatically readjusts to normal position |
| Third Brake as Position Lights | DRL - Daytime Running Lights Additional brake light illuminates simultaneously with position lights ⚙️ Functions Enable or disable the third brake light to illuminate in conjunction with parking or parking/Scandinavian DRL's lights |
| High Beam Assist | High Beam Assist system automatically dips the headlights when it detects either oncoming traffic or vehicles ahead. The system is automatically activated when traveling over 60km/h (37mph) with your dipped beams on HBA - High Beam Assist. V1, V2, V3 - This is the vehicle headlight version. According to OFF Version, make the same Version to ON ⚙️ Functions Enable or disable high beam assist feature 📖 Requirements The vehicle must have Lane Assist. A front assist camera must be installed in the vehicle. ️☑️ In-Car procedure 1. Before using the application, the lights must be set on OFF mode in the vehicle. 2. After activation, go to light settings in your MMI, find 'Light Assist' and turn this option ON. 3. Now with the headlight switch set to auto, push the left stalk forward. The HBA logo indicator at the bottom of the Dashboard display should now be active. |
| HBA Activation Speed | HBA - High Beam Assist High Beam Assist system automatically dips the headlights when it detects either oncoming traffic or vehicles ahead. The system is automatically activated when traveling over 60km/h (37mph) with your dipped beams on ⚙️ Functions Adjust the speed threshold at which the Automatic High Beam lights turn on. Choose from 0 to 80 km/h 📖 Requirements High beam assistant must be installed and enabled in vehicle |
| Auto Lock upon Exit | Once you leave the car with the key, the vehicle locks itself automatically, so you do not have to operate the key or the door sensors ⚙️ Functions Activate or deactivate the automatic locking when leaving your car 📖 Requirements The vehicle must be equipped with a Start System Interface control unit (B7 Start System Interface) ️⚠️ Attention The vehicle is locked automatically if the driver's doors are closed. The function will work even if the passenger doors are open |
| Auto Folding Mirrors | Side-view mirrors can be set to automatically fold when you lock the vehicle, to protect them when the car is parked or being washed in an automated car wash ⚙️ Functions Enable or disable folding mirrors feature to Auto or Manual 📖 Requirements The vehicle must have power-folding mirrors ️⚠️ Attention After app activation, the function must be enabled in the vehicles' multimedia menu 'Mirrors and Wipers' |
| Start/Stop System Deactivation | Start/Stop system - automatically shuts down and restarts the engine to reduce the amount of time the engine spends idling, thereby reducing fuel consumption and emissions ⚙️ Functions Disable or enable the Start/Stop system permanently |
| DRL Settings | DRL - Daytime Running Lights Unlock additional daytime running light options in your car's light settings ⚙️ Functions Enable or disable the additional DRL option |
| Wipers Service Mode | Wipers in service mode mean that the blades are in the upright position. It makes it easier to change the rubbers of the wipers ⚙️ Functions Activate or deactivate the wipers service mode ️☑️ In-Car procedure 1. Turn the Ignition ON 2. Turn the Ignition OFF 3. Press the wiper stalk down |
| A/C Intensity Adjustment for Summer | A/C - Air Conditioning Set your air conditioning to colder or warmer operation. It will increase the cooling or heating of your vehicle's interior ⚙️ Functions Enable or disable A/C intensity by choosing colder or warmer operation 📖 Requirements An air conditioning system must be installed and active |
| A/C Intensity Adjustment for Winter | A/C - Air Conditioning Set your air conditioning to colder or warmer operation. It will increase the cooling or heating of your vehicle's interior ⚙️ Functions Enable or disable A/C intensity by choosing colder or warmer operation 📖 Requirements An air conditioning system must be installed and active |
| Brake Check when Using ACC | ACC - Adaptive Cruise Control If the brake is activated when using adaptive cruise control, the hazard switch will light up ⚙️ Functions ON - Hazard light switch indicates brake lights OFF - Hazard light switch indicates only hazard 📖 Requirements The vehicle must have an adaptive cruise control equipped ️⚠️ Attention Hazard switch will also light up when the brake is pressed during normal driving |
| Rear Spoiler Manual Extension | By default, the electrically extendable spoiler protracts and retracts automatically depending on the speed. Using this function, you can remain the rear spoiler in your desired position at any speed by controlling it with the built-in interior button 📖 Requirements An automatic Rear Spoiler must be installed in the vehicle ️☑️ In-Car procedure Extend/retract the spoiler by pressing the button in the vehicle's interior |
| Steering Response | ⚙️ Functions Change the steering response by switching the driving profile Driving Profile Selection Button - steering response changes via mode button (Standard) Comfort - soft and easy steering Automatic - at low RPM's the steering is soft and easy and at higher RPM's steering is heavier Dynamic - steering is heavier and stiffer for a more sporty feeling |
| Interior Lights Fade-In/Out | Interior lights will fade in and fade out when switched on and off. Normally they light up immediately instead of fading ⚙️ Functions Enable or disable interior lights fading |
| DRL Brigthness | DRL - Daytime Running Lights Adjust the brightness of daytime running lights. 📖 Requirements DRL has to be activated in the vehicle |
| Display SIM APN Setting Screen | APN - Access Point Name The APN defines the network path for all cellular data connectivity By default, when the SIM card is inserted, it is not recognized and the APN settings screen is not displayed. After changing the settings to Automatic, the SIM card will be recognized automatically and the APN settings window will be displayed ⚙️Functions Activate the APN setting display screen of the SIM card 📖 Requirements Please insert a SIM card before setting APN ️☑️ In-Car procedure To access APN settings, go to: Settings -> Connection manager -> Data connection -> Online setting -> Data connection setting -> APN setting |
| Comfort Windows | Open/Close the windows via remote key by holding Lock/Unlock buttons or holding the key rotated for some time in a lock of the door handle 📖 Requirements The electric windows must be calibrated |
| TTS Sport Layout | The Sport Layout allows you to have an RPM gauge in the middle of the dashboard known as Audi Sport Layout. 📖 Requirements Virtual Cockpit Version 1 with at least SW 0300. To check the SW version need to connect to the 17 Dashboard control unit and go to the Information section. ⚠️ Attention The Boost feature (below left) may be non-functional. RPM can be displayed 300 rpm below the actual value on TDI cars. The Dashboard will reboot and other control units will have communication faults. So after need to run a full SCAN/CLEAR. |
| OFF TTS Sport Layout | Turn OFF the Audi Sport Layout from the Dashboard. Use this app ONLY for TTS Sport Layout app deactivation. ⚠️ Attention The Dashboard will reboot and other control units will have communication faults. So after need to run a full SCAN/CLEAR. |
| Comfort Windows | Open/Close the windows via remote key by holding Lock/Unlock buttons or holding the key rotated for some time in a lock of the door handle 📖 Requirements The electric windows must be calibrated |
| TTS Sport Layout | The Sport Layout allows you to have an RPM gauge in the middle of the dashboard known as Audi Sport Layout. 📖 Requirements Virtual Cockpit Version 1 with at least SW 0300. To check the SW version need to connect to the 17 Dashboard control unit and go to the Information section. ⚠️ Attention The Boost feature (below left) may be non-functional. RPM can be displayed 300 rpm below the actual value on TDI cars. The Dashboard will reboot and other control units will have communication faults. So after need to run a full SCAN/CLEAR. |
| OFF TTS Sport Layout | Turn OFF the Audi Sport Layout from the Dashboard. Use this app ONLY for TTS Sport Layout app deactivation. ⚠️ Attention The Dashboard will reboot and other control units will have communication faults. So after need to run a full SCAN/CLEAR. |
| Engine Oil Type | Prolong or reduce intervals between engine oil changes. Regular - use with regular engine oil, it changes at fixed intervals. LongLife - use only with LongLife engine oil. Change intervals depend on individual driving style and engine load. ️⚠️ Attention First turn the ignition ON and then open the vehicle's hood to activate the app |
| Engine Oil Type | Prolong or reduce intervals between engine oil changes. Regular - use with regular engine oil, it changes at fixed intervals. LongLife - use only with LongLife engine oil. Change intervals depend on individual driving style and engine load. ️⚠️ Attention First turn the ignition ON and then open the vehicle's hood to activate the app |
| Multimedia Restart | Reboot the vehicle's multimedia system after coding changes or when the system freezes ⚙️ Functions Restart the multimedia unit |
| Multimedia Restart | Reboot the vehicle's multimedia system after coding changes or when the system freezes ⚙️ Functions Restart the multimedia unit |
| Multimedia Safety Disclaimer | When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units. |
| Multimedia Safety Disclaimer | When the vehicle engine starts with a passenger in the front seat, the safety disclaimer informs the driver about potential hazards. ⚙️ Functions Enable or disable the safety disclaimer message on the multimedia screen. ️⚠️ Attention This app is not supported with MIB3 multimedia units. |
| Headlight Notification | Deactivate the headlight notification so that it doesn't appear on the dashboard when starting the engine with the light switch set to OFF (0) position. |
| Fuel Tank Door Lock Test | Run this test to check the operation of the fuel tank door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the fuel tank door lock test for 12 seconds. |
| Headlight Notification | Deactivate the headlight notification so that it doesn't appear on the dashboard when starting the engine with the light switch set to OFF (0) position. |
| Fuel Tank Door Lock Test | Run this test to check the operation of the fuel tank door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the fuel tank door lock test for 12 seconds. |
| Front Right Door Lock Test | Run this test to check the operation of the front right door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the front right door lock test for 12 seconds. |
| Front Left Door Lock Test | Run this test to check the operation of the front left door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the front left door lock test for 12 seconds. |
| Front Right Door Lock Test | Run this test to check the operation of the front right door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the front right door lock test for 12 seconds. |
| Front Left Door Lock Test | Run this test to check the operation of the front left door lock. During the procedure, the door should lock and unlock after 12 seconds. ⚙️ Functions Activate the front left door lock test for 12 seconds. |
| Headlight Washers Test | Run this test to verify the operation of the headlight washers. During the procedure, the washers will start to spray washer fluid on the headlights. If the headlight washers do not spray fluid on the headlights, this may indicate a problem with it. ⚙️ Functions During the procedure, the headlight washers will spray washer fluid for 2 seconds. |
| Headlight Washers Test | Run this test to verify the operation of the headlight washers. During the procedure, the washers will start to spray washer fluid on the headlights. If the headlight washers do not spray fluid on the headlights, this may indicate a problem with it. ⚙️ Functions During the procedure, the headlight washers will spray washer fluid for 2 seconds. |
| Throttle Pedal Response | Increase the throttle pedal sensitivity and response. This gives the driver a more sporty feeling. ⚙️ Functions Choose between Standard and Responsive throttle settings. ⚙️ Functions |
| Throttle Pedal Response | Increase the throttle pedal sensitivity and response. This gives the driver a more sporty feeling. ⚙️ Functions Choose between Standard and Responsive throttle settings. ⚙️ Functions |
